The Buffalo WCR-HP-G300 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
Buffalo WCR-HP-G300 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.11.1
Default username: admin
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.11.1
How to factory reset (hard reset) Buffalo WCR-HP-G300 :
You can factory reset your Buffalo WCR-HP-G300 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Buffalo WCR-HP-G300 router specifications :
System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
