The Netgear HE102 router has 11mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the Netgear 802.11a Wireless Access Point.
Netgear HE102 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.225
Netgear login instructions
Default username: admin
Netgear router default password list
Default password: 1234
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.225
How to factory reset (hard reset) Netgear HE102 :
You can factory reset your Netgear HE102 in the following way(s)
With the reset button
Have the router powered on (if just booted wait around one minute for it to load)
With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
When the power light starts to blink you can release the reset button and wait for the router to start up
The power light will be solid (not blinking) once the router is started.
How to login to the Netgear HE102 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.0.225
You should be prompted with a login dialogue.
Enter the username: admin
and the password 1234
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
Netgear HE102 router specifications :
System specs
CPU: 266 MHz
RAM: 16 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: 11mbps (a)
WiFi bands
n/a
WiFi throughput: n/a
WAN
None
ETH
1 x 100mbps port
USB-ports: 0
HE102 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Netgear HE102
Netgear stock firmware for the HE102
Stock firmwares for the HE102 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
