How to factory reset TRENDnet TEW-821DAP V2.0R router – Default Login & Password

The TRENDnet TEW-821DAP V2.0R router has Gigabit WiFi, 1 N/A ETH-ports and 0 USB-ports.
It is also known as the TRENDnet AC1200 Dual Band PoE Indoor Wireless Access Point.
How to factory reset TRENDnet TEW-821DAP V2.0R - Default Login & Password

TRENDnet TEW-821DAP V2.0R default Password , Login & Gateway settings :

If you have performed a reset of your TEW-821DAP V2.0R device or not changed the defaults, you
should
be able to access it with the following settings
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) TRENDnet TEW-821DAP V2.0R :

You can factory reset your TRENDnet TEW-821DAP V2.0R in the following way(s)
With the reset button
Have the unit plugged in and powered on
Press and hold the reset button for 15 seconds (use a sharp pencil or a paperclip)
Wait for the router to reboot

TRENDnet TEW-821DAP V2.0R router specifications :

System specs
CPU: 750 MHz
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
1 x N/A port
USB-ports: 0
TEW-821DAP V2.0R Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TRENDnet TEW-821DAP V2.0R
TRENDnet stock firmware for the TEW-821DAP V2.0R
Stock firmwares for the TEW-821DAP V2.0R are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.

TRENDnet