How to factory reset TRENDnet TEW-827DRU v1.0R router – Default Login & Password

The TRENDnet TEW-827DRU v1.0R router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It is also known as the TRENDnet AC2600 StreamBoost MU-MIMO Wi-Fi Router. It also supports custom firmwares like: LEDE Project
The TEW-827DRU v1.0R is featured in our
Best Mid-end routers: buying guide
How to factory reset TRENDnet TEW-827DRU v1.0R - Default Login & Password

TRENDnet TEW-827DRU v1.0R default Password , Login & Gateway settings :

Default Gateway IP: 192.168.10.1
Default username: admin
Default password: ”randomly generated’
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.10.1

How to factory reset (hard reset) TRENDnet TEW-827DRU v1.0R :

You can factory reset your TRENDnet TEW-827DRU v1.0R in the following way(s)
With the reset button
Have the unit plugged in and powered on
Press and hold the reset button for 15 seconds (use a sharp pencil or a paperclip)
Wait for the router to reboot

TRENDnet TEW-827DRU v1.0R router specifications :

System specs
CPU: 1.4 GHz
RAM: 512 MiB
Flash: 256 MiB
Custom firmwares: LEDE Project
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0
TRENDnet TEW-827DRU review (quick overview)
Here is the quick comparison of how the TRENDnet TEW-827DRU compares to
other routers on our site
Average
55/100
Editor
72/100
WiFi
20/100
Hardware
73/100
Current price
$98.99
For a full list of routers and how they compare to the TEW-827DRU v1.0R, check the
Router Buying Guide which will help you buy the most
price-competitive router.
TEW-827DRU v1.0R Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TRENDnet TEW-827DRU v1.0R
Flashing LEDE Project on the TEW-827DRU v1.0R
The TRENDnet TEW-827DRU v1.0R is also supported by the LEDE Project.
To install LEDE aquire the correct firmware from their
Firmware downloads page and
then follow the instructions on their
Quick Start Guide
Note: Make sure to read the LEDE wikis carefully before flashing.