The TRENDnet TEW-825DAP v1.0R router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1750 Mpbs.
It is also known as the TRENDnet AC1750 Dual Band PoE Access Point.
TRENDnet TEW-825DAP v1.0R default Password , Login & Gateway settings :
If you have performed a reset of your TEW-825DAP v1.0R device or not changed the defaults, you
be able to access it with the following settings
Default Network name (SSID): TRENDnet825_2.4GHz_XXXX
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) TRENDnet TEW-825DAP v1.0R :
You can factory reset your TRENDnet TEW-825DAP v1.0R in the following way(s)
With the reset button
Have the unit plugged in and powered on
Press and hold the reset button for 15 seconds (use a sharp pencil or a paperclip)
Wait for the router to reboot
TRENDnet TEW-825DAP v1.0R router specifications :
CPU: 750 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: 1750 Mpbs
1 x Gigabit port
TRENDnet TEW-825DAP review (quick overview)
Here is the quick comparison of how the TRENDnet TEW-825DAP compares to
other routers on our site
For a full list of routers and how they compare to the TEW-825DAP v1.0R, check the
Router Buying Guide which will help you buy the most
TEW-825DAP v1.0R Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TRENDnet TEW-825DAP v1.0R
TRENDnet stock firmware for the TEW-825DAP v1.0R
Stock firmwares for the TEW-825DAP v1.0R are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.