The TRENDnet TEW-823DRU V1.xR router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports.
TRENDnet TEW-823DRU V1.xR default Password , Login & Gateway settings :
Default Gateway IP: 192.168.10.1
Default username: admin
Default password: ”randomly generated’
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.10.1
How to factory reset (hard reset) TRENDnet TEW-823DRU V1.xR :
You can factory reset your TRENDnet TEW-823DRU V1.xR in the following way(s)
With the reset button
Have the unit plugged in and powered on
Press and hold the reset button for 15 seconds (use a sharp pencil or a paperclip)
Wait for the router to reboot
TRENDnet TEW-823DRU V1.xR router specifications :
RAM: 256 MiB
Custom firmwares: OpenWrt
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: n/a
1 x N/A port
4 x N/A ports
TEW-823DRU V1.xR Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TRENDnet TEW-823DRU V1.xR
Flashing OpenWrt on the TRENDnet TEW-823DRU V1.xR
The TRENDnet TEW-823DRU V1.xR is supported by OpenWrt according to their Table of
flashing OpenWrt onto it should be quite straigthforward.
We couldn’t find any specific instructions for flashin OpenWrt on the TRENDnet
TEW-823DRU V1.xR, but since it’s listed in their Table of Hardware as supported, you can
over to the
OpenWrt install instructions and read on there.
Note: Flashing custom firmwares is always on you’re on own risk. Make sure to
read OpenWrt’s wikis to understand the risks and how to proceed if something goes
TRENDnet stock firmware for the TEW-823DRU V1.xR
Stock firmwares for the TEW-823DRU V1.xR are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.