The Netgear WNDR3400v3 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
Netgear WNDR3400v3 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.1.1
Netgear login instructions
Default username: admin
Netgear router default password list
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
How to factory reset (hard reset) Netgear WNDR3400v3 :
You can factory reset your Netgear WNDR3400v3 in the following way(s)
With the reset button
Have the router powered on (if just booted wait around one minute for it to load)
With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
When the power light starts to blink you can release the reset button and wait for the router to start up
The power light will be solid (not blinking) once the router is started.
How to login to the Netgear WNDR3400v3 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.1.1
You should be prompted with a login dialogue.
Enter the username: admin
and the password password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
Netgear WNDR3400v3 router specifications :
System specs
CPU: 530 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (abgn)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
Netgear WNDR3400 review (quick overview)
Here is the quick comparison of how the Netgear WNDR3400 compares to
other routers on our site
Average
30/100
Editor
72/100
WiFi
6/100
Hardware
12/100
Current price
$73.42
For a full list of routers and how they compare to the WNDR3400v3, check the
Router Buying Guide which will help you buy the most
price-competitive router.
